Hydrogen Oxygen Generator HQ-25000(Gas Flow: 25000 L/H) for Boiler, Burning,
Browns Gas Generator is also called the hydrogen and oxygen generator. It is to convert
alternating current (AC) for rectifier DC, in electrolytic cell for
alkaline water (H2O) electrochemical decomposition form hydrogen
ions (H+) and hydrogen ions (OH-), in which the hydrogen ions to
move to electrode plates of the cathode surface, formation of
hydrogen (H2), electrical plate of hydrogen ions to move to the
anode surface, the formation of oxygen (O2).
Formation of hydrogen and oxygen in the electrolytic cell, the
cooling device cooling, security device (tempering prevention
device) after processing, through the hose to the oxyhydrogen flame
gun, open the oxyhydrogen flame gun valve,and it can be lit in
lighters ignition (or electronic ignition), formation of
oxyhydrogen flame, it can be used for cutting, heating or welding
Depending on the industry application, with a little modification,
also can be applied to other industries, such as heavy oil
catalytic combustion increase combustion efficiency, automobile
engine in addition to carbon deposition, etc.
Advantages of Oxyhydrogen Generator
1. Maximum Safety
Steady, reliable fuel delivery.Fuel is available immediately after
machine is switched on.No gas cylinder which can rupture or
Multiple safety devices, including overheating and in-sufficient
water cut-off switches, will automatically turn off power to ensure
the safety of both equipment and user.
2. Environment Friendly
The Oxyhydrogen Gas fuel generated by our Brown Gas Generator / Oxyhydrogen Generator burns completely without creating pollutants, toxic fumes, or
--Does not generate hydrocarbons, carbon monoxide, or carbon
3. High Mobility
Our Brown Gas Generator / Oxyhydrogen Generator come equipped with wheels to facilitate moving the generators to
the job, not the other way around.
Our Brown Gas Generator / Oxyhydrogen Generator immediately generates fuel as needed, no need for dangerous gas
Fuel can be used for long periods of time without overheating
4. High Temperature & high-energy
Calorific value is 34000Kcal/kg.
The Oxyhydrogen flame temperature is over 2800c, it is straight,
less heat loss and high-efficient.It could melt refractory metals
5. Low Cost & Maximum Economy
Oxyhydrogen gas is generated only using electricity and pure water. The cost of electricity and water reduces more than 40% compared
with LPG, Propane, and Acetylene fuel.
Both economical and practical.Energy Saving more than 30% compared with traditional LPG, Propane,
and Acetylene fuel.
6. Low Heat Loss
Use of oxyhydrogen fuel provide a more focused heat source with
less heat loss, maintaining a more comfortable, safer, lower
fatigue working environment.
7. Catalysis characteristic
Hydrogen is an active catalyst which can be mixed with air to feed
in to catalyze and combust all solid, liquid, gas fuel.It also can
speed up the reaction process, promote combustion to be completely.
8. Using by producing
Brown Gas Generator / Oxyhydrogen Generator can supply gas as userdemand by adopting the advanced automatically
control technology, no gas storage.
9. Wide application range
Brown Gas Generator / Oxyhydrogen Generator is suitable for all industries which needs fuel gas to do
flameprocessing,especially flame cutting,flame welding, heating.
Application of Oxyhydrogen Generator
(1) Electronic Industry:
For welding enameled wire, computer wire peeling, LED wafer,
flame-treating circuit board thermocouple and platinum resistor
(2) Medical Industry:
For denture welding. For welding metal fittings and mending sand
holes in dentistry.No-carbon flame disinfection and glass seal.
For welding of laboratory teaching, providing convenient, safe and
clean oxy-hydrogen flame.
(4) Jewelry Industry
For welding kinds of chain and string which are made of platinum,
gold, silver, copper, stainless steel, etc. For mending tiny sand
holes on jewelry casting and jewelry
Instrument welding, Air-condition copper pipe welding, Automobile
exhaust pipe welding, Fishhook welding, Storage battery tinplate
welding, lighting hardware welding and etc.
Large oxyhydrogen generator/HHO generator can be widely used in
Carbon Steel Cutting and continuous casting slab cutting of steel
plant. It can be cooperate with manual cutting torch,semi-automatic
cutting machine, shape cutting machine, CNC cutting machine to
instead of traditional fuel gas.
3.Heating and Sealing
(1) metal and nonmetal heating
(2) glass tube sealing, quartz glass tube sealing
(3) ampoule bottles sealing
(4) water injection drawing sealing
(5) mould repair, quenching crucible heating melting metal
(6) solar wafer processing, IC packaging
4.Polishing:Organic glass/Acrylic polishing
For welding or Heat treating small metal parts, Iron Cutting,
Catalytic combustion of other fuels, Engine carbon cleaning for
Power input: 380 V three-phase four-wire input
Actual operatingpower: 75 KW/H
Gas production Flow: 25000 L/H
Water consumption: < 12.5 Kg/H
Water supply mode: automatic (purified water or filtered tap water)
Cooling: air cooling
Flame Temperature: 2600-3000°C
Work status: continuously work
Dimensions(mm) : L*W*H 1570*1240*1750
Weight: 2300 Kg